Settings Summary in ECO Output File

 

The time the instrument takes to perform a single reported measurement. Factory default is 1 Hz.
  The number of reported measurements in a "packet."
   
   
   
  The number of times a packet will be repeated.
 

The amount of time between packets of reported measurements.

 

HyperTerm settings summary
Ver FLS_2.43 Firmware version
Ave 55 Data collection rate, approx. 1 Hz
    • single-channel meters: Ave = +/-55 • dual-channel meters :Ave = +/-28 • three-channel meters: Ave = +/-12
Pkt 5 Packet size of reported measurements
Set 7 Number of packets in a data set
Rec 0 0=data logging off; 1=data logging on (meters with internal memory)
Cal 0 Fluorometer only. 0=calibration calculations off; 1=calibration calclations on. Output is µg/l
Asv 2 Fluorometer only. Analog scaling value. Counts will be divided by this for analog output: a value of 4 will make the analog output cover the whole output range; 2 will cover half, and 1 will cover only the bottom fourth of the 14-bit count range. Default = 2.
Int 00:01:00 Time between reported packets of data
Dat 07/21/04 Meter's current date
Clk 09:14:19 Meter's current time
Mem 0 Memory function used by ECOView


  ECOView Software   ECOView User's Guide   Output File Settings Output and Device File Formats